Publications

Export 113 results:
Author Title Type [ Year(Desc)]
1990
W. Levy, Landy, C. F., and McCulloch, M. D., Improved models for the simulation of deep bar induction motors, Energy Conversion, IEEE Transactions on, vol. 5, pp. 393–400, 1990.
1999
R. J. Cruise, Landy, C. F., and McCulloch, M. D., Evaluation of a reduced topology phase-converter operating a three-phase induction motor, IEEE International Electric Machines and Drives Conference. IEMDC'99. Proceedings (Cat. No.99EX272), pp. 466–468, 1999.
2007
T. J. Woolmer and McCulloch, M. D., Analysis of the yokeless and segmented armature machine, in Electric Machines & Drives Conference, 2007. IEMDC'07. IEEE International, 2007.
2009
A. Bansal, Howey, D. A., and Holmes, A. S., CM-scale air turbine and generator for energy harvesting from low-speed flows, in TRANSDUCERS 2009. International Solid-State Sensors, Actuators and Microsystems Conference. , Denver, CO, 2009.
D. A. Howey and Pullen, K. R., Hydraulic air pumps for low-head hydropower, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, vol. 223, pp. 115–125, 2009.
D. A. Howey, Holmes, A. S., and Pullen, K. R., Measurement of stator heat transfer in air-cooled axial flux permanent magnet machines, in 35th Annual Conference of IEEE Industrial Electronics Society, IECON'09. , Porto, Portugal, 2009.
2010
G. J. Offer, Howey, D. A., Contestabile, M., Clague, R., and Brandon, N. P., Comparative analysis of battery electric, hydrogen fuel cell and hybrid vehicles in a future sustainable road transport system, Energy Policy, vol. 38, pp. 24–29, 2010.
D. J. Rogers and Green, T. C., A hybrid diverter design for distribution level on-load tap changers, in 2010 {IEEE} Energy Conversion Congress and Exposition, 2010.
D. J. Rogers, Divan, D. M., and Green, T. C., Modelling and optimal switching pattern generation for AC to AC power converters, in {IEEE} {PES} General Meeting, 2010.
D. A. Howey, Holmes, A. S., and Pullen, K. R., Prediction and measurement of heat transfer in air-cooled disc-type electrical machines, in 5th IET International Conference on Power Electronics, Machines and Drives (PEMD 2010), 2010, vol. 44, pp. TU413–TU413.
D. A. Howey, Holmes, A. S., and Pullen, K. R., Radially resolved measurement of stator heat transfer in a rotor–stator disc system, International Journal of Heat and Mass Transfer, vol. 53, pp. 491–501, 2010.
D. A. Howey, North, R., and Martinez-Botas, R., Road transport technology and climate change mitigation, Grantham Institute, Imperial College London, 2010.
A. S. Holmes, Howey, D. A., Bansal, A., and Yates, D. C., Self-powered wireless sensor for duct monitoring, in PowerMEMS, 2010, pp. 2–5.
D. A. Howey, Thermal design of air-cooled axial flux permanent magnet machines, Imperial College London, 2010.
D. J. Rogers and Green, T. C., Zero-current zero-voltage switching for on-load tap changers, in Power Electronics, Machines and Drives (PEMD 2010), 5th IET International Conference on, 2010.
2011
D. A. Howey, Martinez-Botas, R. F., Cussons, B., and Lytton, L., Comparative measurements of the energy consumption of 51 electric, hybrid and internal combustion engine vehicles, Transportation Research Part D: Transport and Environment, vol. 16, pp. 459–464, 2011.
R. T. Doucette and McCulloch, M. D., A comparison of high-speed flywheels, batteries, and ultracapacitors on the bases of cost and fuel economy as the energy storage system in a fuel cell based hybrid electric vehicle, Journal of Power Sources, vol. 196, pp. 1163–1170, 2011.
D. A. Howey, Bansal, A., and Holmes, A. S., Design and performance of a centimetre-scale shrouded wind turbine for energy harvesting, Smart Materials and Structures, vol. 20, p. 085021, 2011.
D. A. Howey, Holmes, A. S., and Pullen, K. R., Measurement and CFD Prediction of Heat Transfer in Air-Cooled Disc-Type Electrical Machines, IEEE Transactions on Industry Applications, vol. 47, pp. 1716–1723, 2011.
R. T. Doucette and McCulloch, M. D., Modeling the CO2 emissions from battery electric vehicles given the power generation mixes of different countries, Energy Policy, vol. 39, pp. 803–811, 2011.
R. T. Doucette and McCulloch, M. D., Modeling the prospects of plug-in hybrid electric vehicles to reduce CO2 emissions, Applied Energy, vol. 88, pp. 2315–2323, 2011.
N. Terdich, Martinez-Botas, R. F., Howey, D. A., Copeland, C. D., and Costall, A., Off-Road Diesel Engine Transient Response Improvement by Electrically Assisted Turbocharging, in 10th International Conference on Engines & Vehicles, 2011.
G. J. Offer, Contestabile, M., Howey, D. A., Clague, R., and Brandon, N. P., Techno-economic and behavioural analysis of battery electric, hydrogen fuel cell and hybrid vehicles in a future sustainable road transport system in the UK, Energy Policy, vol. 39, pp. 1939–1950, 2011.
J. Hey, Howey, D. A., and Lamperth, M., Transient thermal modelling of an Axial Flux Permanent Magnet ( AFPM ) machine with model parameter optimisation using a Monte Carlo method, in Vehicle Thermal Management Systems 10, 2011.
2012
D. A. Howey, Childs, P. R. N., and Holmes, A. S., Air-Gap Convection in Rotating Electrical Machines, IEEE Transactions on Industrial Electronics, vol. 59, pp. 1367–1375, 2012.
V. Yufit, Wu, B., Howey, D. A., Offer, G. J., Mitcheson, P., and Brandon, N. P., Battery systems - modular design, fault identification and advanced monitoring. 16th International Meeting on Lithium Batteries IMLB 2012, Korea, 2012.
J. Luis Domínguez-García, Rogers, D. J., Ugalde-Loo, C. E., Liang, J., and Gomis-Bellmunt, O., Effect of non-standard operating frequencies on the economic cost of offshore AC networks, Renewable Energy, vol. 44, pp. 267–280, 2012.
B. Wu, Offer, G. J., Yufit, V., Howey, D. A., and Brandon, N. P., Fault analysis in battery module design for electric and hybrid vehicles, in 6th IET International Conference on Power Electronics, Machines and Drives (PEMD 2012), 2012, pp. C11–C11.
J. D. K. Bishop, Axon, C. J., Tran, M., Bonilla, D., Banister, D., and McCulloch, M. D., Identifying the fuels and energy conversion technologies necessary to meet European passenger car emissions legislation to 2020, Fuel, vol. 99, pp. 88–105, 2012.
R. Camilleri, Woolmer, T., Court, A., and McCulloch, M. D., Investigation into the temperature profile of a liquid cooled YASA AFPM machine, in 6th IET Conference on Power Electronics, Machines and Drives, (PEMD2012) , Bristol, UK, 2012.
G. J. Offer, Yufit, V., Howey, D. A., Wu, B., and Brandon, N. P., Module design and fault diagnosis in electric vehicle batteries, Journal of Power Sources, vol. 206, pp. 383–392, 2012.
D. A. Howey, Policy: a challenging future for cars, Nature Climate Change, vol. 2. Nature Climate Change, pp. 28–29, 2012.
M. Tran, Banister, D., Bishop, J. D. K., and McCulloch, M. D., Realizing the electric-vehicle revolution, Nature Climate Change, vol. 2, pp. 328–333, 2012.
R. Camilleri, Howey, D. A., and McCulloch, M. D., Thermal limitations in air-cooled axial flux in-wheel motors for urban mobility vehicles: A preliminary analysis, in 2012 Electrical Systems for Aircraft, Railway and Ship Propulsion, 2012, pp. 1–8.
2013
D. J. Rogers and Green, T. C., An Active-Shunt Diverter for On-load Tap Changers, {IEEE} Transactions on Power Delivery, vol. 28, pp. 649–657, 2013.
A. M. Bizeray, Duncan, S. R., and Howey, D. A., Advanced battery management systems using fast electrochemical modelling, in Hybrid and Electric Vehicles Conference 2013 (HEVC 2013), 2013, pp. 2.2–2.2.
D. F. Kavanagh, Howey, D. A., and McCulloch, M. D., An applied laboratory characterisation approach for electric machine insulation, in 9th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives (SDEMPED) , Valencia, Spain, 2013.
C. Lorf, Martínez-Botas, R. F., Howey, D. A., Lytton, L., and Cussons, B., Comparative analysis of the energy consumption and CO2 emissions of 40 electric, plug-in hybrid electric, hybrid electric and internal combustion engine vehicles, Transportation Research Part D: Transport and Environment, vol. 23, pp. 12–19, 2013.
J. Stevens and Rogers, D. J., Control of multiple VSC-HVDC converters within an offshore AC-hub, in 2013 {IEEE} Energytech, 2013.
R. R. Richardson and Howey, D. A., Effect of temperature spatial non-uniformity on electrochemical impedance in lithium-ion cells. 10th Symposium on Fuel Cell and Battery Modelling and Experimental Validation (ModVal 10) Stuttgart, 18-20 March 2013, 2013.
J. D. K. Bishop, Axon, C. J., Bonilla, D., Tran, M., Banister, D., and McCulloch, M. D., Evaluating the impact of V2G services on the degradation of batteries in PHEV and EV, Applied Energy, vol. 111, pp. 206–218, 2013.
D. A. Howey, Yufit, V., Mitcheson, P. D., Offer, G. J., and Brandon, N. P., Impedance measurement for advanced battery management systems, in 2013 World Electric Vehicle Symposium and Exhibition (EVS27), Barcelona, 2013, pp. 1–7.
R. Camilleri and McCulloch, M. D., Investigating Mechanisms for an Evaporative Cooled In-Wheel AFPM Machine, in The 13th UK Heat Transfer Conference (UKHTC2013), London, UK, 2013.
C. R. Birkl and Howey, D. A., Model identification and parameter estimation for LiFePO4 batteries, in Hybrid and Electric Vehicles Conference 2013 (HEVC 2013), London, 2013, pp. 2.1–2.1.
B. Wu, Yufit, V., Marinescu, M., Howey, D. A., Martínez-Botas, R. F., and Brandon, N. P., Modelling and measurement of uneven heat generation in lithium-ion battery packs. 10th Symposium on Fuel Cell and Battery Modelling and Experimental Validation (ModVal 10) Stuttgart, 18-20 March 2013, 2013.
V. Yufit, Howey, D. A., Mitcheson, P. D., Offer, G. J., and Brandon, N. P., On-line battery condition monitoring using low-cost fast electrochemical impedance spectroscopy for automotive applications. 9th International Symposium on Electrochemical Impedance Spectroscopy EIS 2013, 16-21 June 2013, Okinawa, Japan, 2013.
X. Hu, Liang, J., Rogers, D. J., and Li, Y., Power Flow and Power Reduction Control Using Variable Frequency of Offshore AC Grids, {IEEE} Trans. Power Syst., vol. 28, pp. 3897–3905, 2013.
P. Armstrong, Wong, R., Kang, R., Camilleri, R., Howey, D. A., and McCulloch, M. D., A reconfigurable PV array scheme integrated into an electric vehicle, in Hybrid and Electric Vehicles Conference 2013 (HEVC2013), London, UK, 2013.
R. Camilleri, Armstrong, P., Ewin, N., Richardson, R. R., Howey, D. A., and McCulloch, M. D., The value of a clutch mechanism in electric vehicles, in Electric Vehicle Symposium and Exhibition (EVS27), Barcelona, Spain, 2013.

Pages